The Lotus 907 engine

The Lotus engine sat idle in storage for about 32 years. The compression readings were low and after a "leak down" test was performed, one could conclude the rings were stuck after so many years of inactivity. I decided to have it dropped off at the machine shop in Olean, Ny for a disassembly, and general checkover. The engine didn't need a complete rebuild by any means, but anything which hasn't been run to a long time deserves a general checkover while things are opened up.

The Engine was dropped off at Glen and Dicks Automotive machine shop and the exploritory surgery was performed by a machinist over a period of quite a few months.

Once the engine was broken down the piston bores honed and pistons re-ringed, I decided to replace the main bearings and all the gaskets at the same time. I also replaced 2 suspect valves which looked just a little worn.

The cost was extremely reasonable and the labor quality was excellent.

A breakdown of total costs follows:

1. Assemble and diassemble lotus 907 engine.............. $1320.00

2. Resurface flywheel and R+R pins............................... $60.00

3. resurface aluminum head.............................................$ 50.00

4. valve job (16 valve).......................................................$150.00

5. 2 replacement lotus valves............................................$ 18.00

6. gasket set..........................................................................$150.00

7. 1 set main bearings...........................................................$125.00

8. hone 4cyl block and align.................................................$90.00

9. sealant.................................................................................$38.00

10. Replace tensioner bearings............................................$24.90

11. Plugs ( soft... brass and stainless steel)........................$11.22

12. Degrease and clean engine.............................................$150.00

13. Check and polish crankshaft...........................................$50.00

14. R+R pistons on rods, glass bead, and hone pin bores..$60.00

Total Price................................................................................$2297.12

The attached picture shows the Lotus 907 awaitng the manifold, the carburators, and the other accessories before install.

Next.... new tires, engine install and a test drive...........

Pete's Kit's, Paint Jobs, and Engine work.......

We seemed to be moving along quite well. Kenny got the engine running after rebuilding the carburetors but wasn't happy with the engine compression. The readings were about 80 pounds across the four cylinders. Ken thought the best route to go would be to re-ring the engine as that was the only thing he could see wrong with an engine with about 26,000 miles. He theorized the rings were stuck from the long storage time and to be on the safe side, the engine should be given a thorough inspection. He recommended replacing the rings, gaskets, and any valves, and reassembling the engine. He knew a great machine shop in the area and quickly removed the engine from the car, delivered the engine to the machine shop where it sat, and sat, and sat for about 3 months or so.

In the meantime, while the engine was sitting in the machine shop waiting for the next ice age, Randy, from Randy's Collision in Great Valley , NY picked up the Jensen GT and was tasked with doing some light bodywork and re-painting the car the original color ( a metallic Saturn Gold). Kenny said he was looking for work as things were a bit slow, so he was anxious to start working on the car. Apparently, Kenny was very happy with his bodywork and paint jobs so he recommended his work highly. I have been through this before, and remembered a body shop telling me in Maine how they prioritize work. Insurance work is given first priority as it is clearly the most profitable. The last priority is non-insurance work.......... I remembered this as my car sat at Randy's collision for months with no real work being accomplished and never a phone call from them. I called them a few times to check on progress. Oh, they were working on it, but at glacial speed. I am not sure who could move faster in a race........ a starfish or Randy's collision service. I think I would put my money on the starfish.

I really wanted to get my car painted in Maine with people I knew and trusted, but my engine was completely out of the car for months on end, it couldn't move, so I didn't have much of a choice when it came to bodywork.

Well, they finished the car and I will say the paint job looks nice. If I were grading them, here is how I would have put things in summary.

1) Paint and bodywork - A

2) Communication - C-

3) Organization - F ( they broke some parts, lost some others, and really didn't seem to care as I had to pick up the tab for their mistakes )

4) Price - C ( let's just say, I am from Maine and they knew it)

5) Timeliness - D

Pete's Kits - Buying a kit from Pete Bahr is a wonderful experience. Pete is a retired engineer which automatically puts him in the RSG category ( Really Smart Guy). He also owns one of the fastest Jensen Healey's on the planet. His Jensen has all the "Goodies", which help it produce around 230 hp. During his upgrade and restoration, Pete developed and engineered some custom "Kits" which help the Jensen perform better, safer, and more reliably than stock. Pete is the type of guy who can be as comfortable in a 5 star restaurant as he can in a NY "dive" bar filled with drunks and cigarette smoke. Pictures of Pete's "YELOWDOG" can be seen here at http://jhppg.com/gallery/main.php?g2_itemId=27088

I had the privilege of driving "YellowDog" and must say this car is just mind blowing. This car is not for the timid as one steps on the gas, but it also has very good low end manners which is probably due to the special distributorless ignition system.

The kit's Pete sells always fit perfect, perform as stated, and are easy to install. He developed them as new parts were no longer available or redesigned parts which would perform better than the original resulting in more reliability and safety.

I bought the 5 speed transmission shifter upgrade kit. Every original getrag 5 speed unit wears within 25,000 miles. The transmission is fine, but the shifter linkage wears pre-maturely resulting in hard shifts, and trouble "finding" the correct gear. The problem is like an enlarging prostate for men...... it's not "if" it is going to happen as men age, but "when" it will happen. The only cure is the Delta Motorsports bushing Kit...... which will fix the problem temporarily, or the Pete's Kit Upgrade, which will fix the problem permanently.

It's a Great looking Jensen GT

I emailed Jim and received a quick reply along with some pictures of the car. He was in the middle of moving some things at his sisters place and the Jensen GT was one of his cars which he had stored at her house. He emailed me some initial pictures and described the condition of the car as best he could. The car looked beautiful and although it needed a bit of TLC, it was in much better shape than many Jensens which need restoration today. Jensens came from the factory with NO RUSTPROOFING applied to the car. My Jensen Healey which I restored in 2005, needed the usual mechanical systems rebuilt, but it also needed quite a bit of bodywork. Bodywork with my first Jensen Healey was something which started out as "minor" and ended up as "major"as more rust was discovered as things were inspected and slowly uncovered. Even the most knowledgable body man can not see the extent of corrosion to the naked eye. Jim was confident this Jensen GT did not have any rust and upon later inspection he was absolutely right.

Over the long storage time, the brakes had frozen to the drums, which made the car difficult to move. Jim needed the car moved off his sister's property with out delay, so I hired a tow truck with a flat bed to winch the car onto the deck and move it safely. I promised Jim I would restore the car to its original condition, and would start to work on it as soon as the car arrived in New York with my friends Jeff and Laura. It was a wonderful gesture to receive such a nice car, I sent down the biggest Maine Lobster Dinner I could find for Jim and his family. I thought it was the least I could do.

I received the car from the shipping company about three weeks later. I had it shipped to Salamanca Ny as my friend Jeff Peterson graciously agreed to look after the car as I planned the restoration from various providers in the Salamanca area. Since Jeff has fully restored 3 Jensens, he had access to a slew of people with Jensen experience. I figured I would come up and visit every few months and plan out each step of the restoration as my time and budget permitted.

Attached are some pictures of the car the day it arrived in NYC.